Gating Technology
Sub-categories
4
Products
18
Sprue bushings, machine nozzle filters and sprue-separation systems for clearly defined melt flow in injection moulds. Reduces sprue waste, ensures consistent gate quality and short cycle times.
S4120 Runner selector
€86.80*
S4120_A:
14
With the runner selector the cold runner sprue can be blocked from the mould parting line or its desired alignment can be adjusted.
This is done by reinserting the treaded part after setting the desired flow channel direction or locking it in a 90, 180 or 270° position in the intended receptacle of the runner selector body. The functional part then remains blocked in the set position.
All runner selectors have an H7 bore for using an ejector pin Ø 5 mm as an ejection aid for the cold runner.
S4121 Runner selector
€98.00*
S4121_A:
18
The technical design of this runner selector corresponds to the solution S4120/…, but as a variant it also offers a cooling option for the ejector pin in the runner selector body, so that less heat is transferred from the mould via the ejector to the cold runner sprue area.
The circumferential recess is suitable for cooling water flows up to Ø 8 mm. Sealing is via 2 integrated O-rings.
S4122 Runner adjuster unit with hole
€0.00*
S4122_SW:
5
|
S4122_Typ:
Ohne Hinterschnitt
|
S4122_a1:
30
|
S4122_a2:
11
|
S4122_b1:
22
|
S4122_d1:
16
|
S4122_d2:
5
|
S4122_f:
4,2
|
S4122_h1:
46
|
S4122_h2:
14
|
S4122_h3:
10
|
S4122_h4:
7
|
S4122_h5:
25
Our runner adjuster unit with hole allows a quick shut-off in case of defected cavity in a big multi cavity mold. The production can be continued, till the operator takes time to repair the defected cavity.With undercut for the ejection process of the cold runner sprue. S4122/OH hole without undercut. The mounting of this unit goes into the moving mold half.
S4123 Runner adjuster unit without hole
€0.00*
S4123_SW:
5
|
S4123_a1:
30
|
S4123_a2:
11
|
S4123_b1:
22
|
S4123_d1:
16
|
S4123_f:
4,2
|
S4123_h1:
66
|
S4123_h2:
14
|
S4123_h3:
7
Our runner adjuster unit with hole allows a quick shut-off in case of defected cavity in a big multi cavity mold. The production can be continued, till the operator takes time to repair the defected cavity. With undercut for the ejection process of the cold runner sprue. S4123/OH hole without undercut. The mounting of this unit goes into the moving mold half.
S4140 Cutting pin with cylindrical head, 1 gate
€91.20*
S4140_Typ:
1 Anspritzöffnung, 180°
|
S4140_d1:
12
|
S4140_d2:
16,5
|
S4140_l1:
60
|
S4140_l2:
7
|
S4140_l3:
14,5
Mat.: 1.3343 (HSS), 64 HRC Cutting pin with laterally filling of cavity and subsequent sprue removal.
Variants from €78.00*
S4141 Edge gate cutting sprue bush
€140.10*
S4141_Anschnitte:
2
|
S4141_D1:
12
|
S4141_L1:
76
|
S4141_L2:
61,5
|
S4141_R:
15,5
Mat.: 1.2826 (Cold work steel), 54 HRC
Sprue bush for separating of lateral sprue. A machined sprue channel is completely elaminated. This enables the designer to use smaller mold size.
Variants from €126.90*
S4142 Sprue puller bush
€92.50*
S4142_D1:
18
|
S4142_D2:
12
|
S4142_D4:
22
|
S4142_L1:
36
Mat.: 1.2510 (Cold work steel), 58 +2 HRC
Variants from €81.95*
S4143 Cutting pin with cylinder head, 2 gates
€87.25*
S4143_Typ:
2 Anspritzöffnungen, 120°
|
S4143_d1:
10
|
S4143_d2:
13,7
|
S4143_l1:
50
|
S4143_l2:
5
|
S4143_l3:
14,5
Mat.: 1.3343 (HSS), 64 HRC Cutting pin with 2 laterally fillings of cavities and subsequent sprue removal.
S4146 Cutting pin, square, 1 gate
€99.15*
S4146_a:
10
|
S4146_b1:
3
|
S4146_b2:
3
|
S4146_b3:
2,9
|
S4146_b4:
2,6
|
S4146_b5:
3,8
|
S4146_b6:
3,4
|
S4146_b7:
4
|
S4146_d3:
M6
|
S4146_l1:
60
|
S4146_l3:
10
|
S4146_l4:
38
|
S4146_l5:
26
|
S4146_n:
1
|
S4146_r1:
1
|
S4146_r2:
1,5
Mat.: 1.3343 (HSS), 64 HRC Cutting pin, square, with 1 gate. Straight flat sprue removal.
S4147 CUTTING PIN, SQUARE, 2 GATES
€137.50*
S4147_a:
12
|
S4147_b1:
4
|
S4147_b2:
4,2
|
S4147_b3:
3,7
|
S4147_b4:
3,2
|
S4147_b5:
5
|
S4147_b6:
4
|
S4147_b7:
5
|
S4147_d3:
M6
|
S4147_l1:
60
|
S4147_l3:
14,5
|
S4147_l4:
38
|
S4147_l5:
26
|
S4147_n:
2
|
S4147_r1:
1,5
|
S4147_r2:
2
Mat.: 1.3343, 64 HRC
Variants from €118.95*
S4148 CUTTING PIN, 1 GATE, NO HEAD
€78.00*
S4148_1x180°:
1x180°
|
S4148_L1:
50
|
S4148_L3:
10,5
|
S4148_L4:
31,5
|
S4148_L5:
21,5
|
S4148_L6:
1,5
|
S4148_b1:
8
|
S4148_b2:
3
|
S4148_b3:
2
|
S4148_d1:
10
Mat.: 1.3343, 64 HRC
S4149 CUTTING PIN, 2 GATES, NO HEAD
€87.25*
S4149_2x90°:
2x90°
|
S4149_L3:
10,5
|
S4149_L4:
31,5
|
S4149_L5:
21,5
|
S4149_L6:
1,5
|
S4149_b1:
8
|
S4149_b2:
3
|
S4149_b3:
2
|
S4149_d1:
10
|
S4149_l1:
50
Mat.: 1.3343, 64 HRC
S4403 Wire covering for hot runner molds
€86.20*
S4403_A:
14,5
|
S4403_B:
10
|
S4403_L:
500
Mat.: 1.4310 (Wire)
Tmax.: 300 °C
Cover material for wire chanals in hot runner molds.
Simple solution to avoid squeezing of the cables positioned in the wire chanal.
Stainless steel wire, simple mounting according the geometric design.
Variants from €42.20*
S4620 Mould gap filter
€235.10*
S4620_S:
0,3
The mold gap filter with small dimensions ensures gentle filtration of the material with low pressure loss.
At the choice of the right gap size you have to consider to the hot-runner nozzle opening in the mold and the injection weight of the plastic part. Please ask us.
S4621 Mould gap filter
€147.20*
S4621_I:
35 (-0,05)
|
S4621_S:
1
Alternative filter insert ensures good mixing of the material.
S4630 Machine extended nozzle
€0.00*
The new dipping nozzle is recommended for direct gating.
This nozzle is preferably applied for producing of large area parts like bumpers.
Special features:
- Dipping nozzle with integrated coil heater.
- Uniform temperature profil by means of logarithmic winding.
- Self-contained, plastic sealed system.
- Trouble free immersion of nozzle into mould because of only 46 mm shaft diameter.
- PTFE insulated connection cable with ground conductor and metal braided sleeve.
- Material savings through short sprue.