S6705 Holder for Ejector Sleeves
| 3D | |||||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
S6705-10
|
10 | 16,7 | 19,2 | M22x2 | 20 | 5,1 | 6,5 | 8 | €15.12 | ||
S6705-12
|
12 | 20,7 | 24 | M27x2 | 22 | 7,1 | 8,5 | 12 | €16.52 | ||
S6705-14
|
14 | 22,7 | 27 | M30x2 | 22 | 7,1 | 10,5 | 12 | €18.06 | ||
S6705-16
|
16 | 22,7 | 27 | M30x2 | 22 | 7,1 | 12,5 | 12 | €18.06 | ||
S6705-4
|
4 | 8,7 | 11,2 | M14 | 16 | 3,1 | 2,5 | 5 | €11.34 | ||
S6705-5
|
5 | 10,7 | 13,2 | M16 | 17 | 3,1 | 3,5 | 6 | €12.04 | ||
S6705-6
|
6 | 12,5 | 14,5 | M18 | 18 | 5,1 | 4,5 | 6 | €12.74 | ||
S6705-8
|
8 | 14,7 | 17,2 | M20x2 | 20 | 5,1 | 5,5 | 8 | €13.58 |
Details & specifications
The ejector holder is a simple and safe system to set the ejector pins into the mould plate or into the ejector plate. This solution dramatically reduces the machining time and, thanks to its geometry, avoids potential failures caused by the ejector head locking. The ejector holder is also available with an ejector anti-twist lock system and with an axial hole for applications with ejector slave.